Journey All-in-One Stroller to Wagon Travel System

Video transcripts

• Transcript: How to Fold

  Hi, I'm Ryan, the product manager and CPST from Baby Trend, and I'm going to be showing you how to fold the Journey All-in-One Stroller to Wagon Travel System.

  The travel system will only fold while in wagon mode. So, if you have the infant car seat attached you'll start by removing that first.

  To remove, you squeeze the release handle located at the top rear of the car seat and lift. Now, remove any other attachments you have installed by pressing on the release buttons located on either side of the attachments and lifting. Flip both adapters back into their storage position and zip the storage pocket closed. With the folded front rail facing you, locate the lock-release latch on the right side of the wagon. Slide down the lock cover and press on the release latch to disengage while simultaneously lifting the front rail. You will hear a click when the front rail has locked into place.

  Always press down on the front rail to make sure that it's properly secured. Make sure the 1-step brakes are engaged. You can now install the child tray and front canopy. The wagon can fold if you have the canopies and child's tray installed.

  Now you'll locate the lock release latches located on either side of the handlebar. Press in on both latches simultaneously and slide them both up. This will disengage the wagon frame.

  Now, while holding the handlebar, pull on the side rail handle until the fold latch is engaged. You can push both sides together to confirm that the fold latch is secured. For a more compact fold you can put the handle in its storage position by pressing on the adjustment buttons on either side while rotating the handle. And now, you're ready to go!

  Feel free to check out more of our "How To" and "Installation" videos provided with you in mind.

• Transcript: How to Convert from Stroller or Car Seat Mode to Wagon Mode

  Hi, I'm Ryan, the product manager and CPST from Baby Trend, and I'm going to be showing you how to convert the Journey All-in-One Stroller to Wagon Travel System from stroller mode or infant car seat mode to wagon mode.

  If you have the infant car seat attached you'll start by removing that first. To remove, you squeeze the release handle located at the top rear of the car seat and lift.

  Now, remove any other attachments you have installed by pressing on the release buttons located on either side of the attachments and lifting. Flip both adapters back into their storage position and zip the storage pocket closed. With the folded front rail facing you, locate the lock-release latch on the right side of the wagon. Slide down the lock cover and press on the release latch to disengage while simultaneously lifting the front rail. You will hear a click when the front rail has locked into place. Always press down on the front rail to make sure that it's properly secured.

  You can now install the child tray and front canopy. And you're ready to go!

  Feel free to check out more of our "How To" and "Installation" videos provided with you in mind.

• Transcript: How to Convert from Wagon Mode to Car Seat Mode

  Hi, I'm Ryan, the product manager and CPST from Baby Trend, and I'm going to be showing you how to convert the Journey All-in-One Stroller to Wagon Travel System from wagon mode to car seat mode.

  Start off by removing the front canopy from the wagon by sliding it off. You'll also want to remove the child tray using these 2 tabs. Find the lock-release latches located on either side of the wagon. Slide down the lock covers and press on the release latches on both sides simultaneously.

  Now, you'll slide both lock-release latches down to bring the front rail down. Make sure you press down on the front rail to make sure it's securely latched. Unzip the pockets containing the adapter towers located on either side of the inside of the wagon. Flip both adapters out of their storage position. You should hear a click when they've locked into place.

  Now, you're ready to attach the car seat adapter. Locate the word "Front" on the car seat adapter. This will be oriented furthest from the handlebar. Align the anchors on the car seat adapter with the anchors on the wagon frame and push them together until you hear a click. Orient your car seat to face the handlebar and align the car seat plungers with the plunger connectors on the car seat adapter. Push down on the car seat until you hear a click.

  Always lift up on the car seat to make sure that it's properly secured. And now you're ready to go!

  Feel free to check out more of our "How To" and "Installation" videos provided with you in mind.

• Transcript: How to Convert from Wagon Mode to Stroller Mode

  Hi, I'm Ryan, the product manager and CPST from Baby Trend, and I'm going to be showing you how to convert the Journey All-in-One Stroller to Wagon Travel System from wagon mode to stroller mode.

  Start off by removing the front canopy from the wagon by sliding it off. You'll also want to remove the child tray using these 2 tabs. Find the lock-release latches located on either side of the wagon. Slide down the lock covers and press on the release latches on both sides simultaneously.

  Now, you'll slide both lock-release latches down to bring the front rail down. Make sure you press down on the front rail to make sure it's securely latched. Unzip the pockets containing the adapter towers located on either side of the inside of the wagon. Flip both adapters out of their storage position. You should hear a click when they've locked into place. And now you're ready to attach the toddler seat.

  Align the seat anchors on the toddler seat with the anchors on the wagon frame and push them together until you hear a click. Always lift up on the toddler seat to make sure that it's properly secured. And now you're ready to go!

  Feel free to check out more of our "How To" and "Installation" videos provided with you in mind.

• Transcript: How to Assemble and Install the Car Seat Adapter

  Hi, I'm Charlye, the brand manager from Baby Trend, and I'm going to be showing you how to assemble and install the car seat adapter and infant car seat on the Journey All-in-One Stroller to Wagon Travel System.

  Start by unfolding the car seat adapter and placing it on a flat surface with the straps facing down. Connect both ends of the adapter bars together. Make sure both pins click securely into place.

  Once the adapter bars are securely attached, pull the mesh fabric over the car seat adapter modules on both sides. Secure the snap buttons on the fabric to the adapter frame on both sides.

  Now you'll prepare the wagon. Find the lock-release latches located on either side of the wagon. Slide down the lock covers and press on the release latches on both sides simultaneously.

  Now, you'll slide both lock-release latches down to bring the front rail down. Make sure you press down on the front rail to make sure it's securely latched. Unzip the pockets containing the adapter towers located on either side of the inside of the wagon. Flip both adapters out from their storage positions. You should hear a click when they've locked into place.

  Before installing the car seat adapter, locate the label marked "FRONT." Make sure the word "FRONT" is readable from the handlebar. If the word is upside down, the car seat adapter is not positioned correctly.

  Now you're ready to attach the car seat adapter. Align the connectors on both sides of the car seat adapter with the connectors on the wagon frame. Make sure the mesh fabric is clear of the adapter connectors. Push the adapter down onto both adapter towers until you hear them click securely into place. Always make sure the car seat adapter is fully connected to the wagon before attaching the infant car seat.

  Now you're ready to attach the included infant car seat. Line up the car seat plunger with the plunger connector on the car seat adapter. Push down on the car seat until you hear a click. Always lift up on the car seat to make sure that it's properly secured. And now you're ready to go!

  Feel free to check out more of our "How To" and "Installation" videos provided with you in mind.